“The first rule is not to lose. The second rule is not to forget the first rule."

Quote by Warren Buffett

World GT

  • 1 Cell Lipo with 10.5 Brushless System
  • or 2 Cell Lipo with 17.5 Brushless System
  • Weight to BRCA rules

F1 Retro (Foam Class):

  • F1 Retro is based on the late 70’s and 80’s wide formula one cars with large very sticky tyres, we have replicated this in this class by allowing the unlimited choice of Foam tyres on the 205mm wide cars, Such as the Tamiya F103 or the very popular 3 Racing F109
  • 21.5 turn brushless motor (open timing) or G2 brushed
  • 2s Lipo or 6 cell NiMHs allowed
  • 205mm Maximum Width
  • Any commercially available F1 intended foam tyre
  • NO PAN CAR TYPE CHASSIS ALLOWED
  • 1050g minimum weight limit

F1 Modern (Rubber Class):

  • F1 modern is based on the new generation of narrow F1 cars with very restrictive rules, we have replicated this class by setting a restrictive width chassis and rubber tyre, To take part in this class you would need something like a Tamiya F104 or HPI F10 to mention a couple
  • 21.5 turn brushless motor (open timing) or G2 brushed
  • 2s Lipo or 6 cell NiMHs allowed
  • 185mm Maximum Width
  • Any commercially available F1 intended Rubber tyre
  • Maximum wheel width 40mm
  • NO PAN CAR TYPE CHASSIS ALLOWED
  • 1050g minimum weight limit

12th Pan

  • Single cell Lipo 3.7v
  • Racer Class - Any 10.5 Brushless Motor Brushless motor (Non Timed - Blinky)
  • Pro Class - Open Modified (i.e. Any Brushless Motor, any speedo settings)

Mini 2WD

  • Any motor allowed.
  • Maximum of 2 cell lipo allowed or 6 cell NiMHs allowed
  • Control Tyres will be Sweep Mini Touring Car Rubber Wheels/Tyres 25/33/40deg, Part number SWP-MN25/33/40 available on the day or bring your own, any combination permitted
  • Must be 2 wheel drive

Mardave Stock

  • 1kg weight limit, 3mm ride height
  • Standard G2 motor only
  • Maximum of 4 cell NiMHs allowed
  • Bearings allowed all round and rear Diffs are allowed
  • Any reversible speedo below £69 allowed

Mardave Brushless

  • 1kg weight limit, 3mm ride height
  • 13.5 brushless motor and speedo
  • Maximum 1 cell lipo allowed
  • Bearings allowed all round and rear Diffs are allowed